Best foregrips and handstops
Vertical grips, angled grips and handstops all index your support hand. Which one you may legally fit depends on what the firearm is.
A forward grip gives the support hand a repeatable place to land and something to pull against. Vertical grips are the most familiar, angled grips keep the wrist straighter, and handstops are small index points that add almost no weight.
Choose the mounting system first. Modern handguards use M-LOK slots. Older ones use Picatinny rail. Most of these designs are sold in both.
Quick picks
| Pick | Grip | Why |
|---|---|---|
| Angled grip | Magpul AFG Angled Fore Grip | The design that defined the category, in M-LOK and rail versions. |
| Short vertical grip | BCM Vertical Grip Mod 3 | Compact, light and canted slightly forward. |
| Full-length vertical grip | Magpul RVG and M-LOK MVG Vertical Grips | Simple and inexpensive, for rail or M-LOK. |
| Handstop | Magpul M-LOK Hand Stop Kit | A minimal index point that also works as a barricade stop. |
How to choose
Match the grip to how you hold the rifle
If you wrap your thumb over the handguard and pull back, an angled grip or a handstop gives you an index point without forcing a fist. If you hold a vertical grip like a broomstick, a full-length grip works. Many people use a short vertical grip as a stop, with the hand half on the grip and half on the handguard.
M-LOK or Picatinny
Check the handguard. M-LOK parts bolt into slots with T-nuts. Picatinny parts clamp onto a railed section. Buying the wrong one is the most common mistake.
Length and snag
Longer grips offer more to hold and more to catch on slings, barricades and vehicle doors. Stubby grips and handstops stay out of the way.
The grips
AFG Angled Fore Grip
Best for a thumb-forward hold
- Type
- Angled foregrip
- Material
- Reinforced polymer
- Texture
- Molded texture
- Traction
- Medium
- Adds
- Low-profile wedge
- Install
- M-LOK or Picatinny, by version
- Price tier
- Mid-range
The AFG places the support hand high and close to the bore, with a ramp for the palm. Magpul makes a version for Picatinny rail and one for M-LOK.
Trade-off. It takes up a long stretch of the handguard, which crowds lights and switches on short rails.
Kinesthetic Angled Grip (KAG)
Best for an index point that uses little rail
- Type
- Angled foregrip
- Material
- Polymer
- Texture
- Ribbed
- Traction
- Medium
- Adds
- Small forward-angled hook
- Install
- M-LOK, KeyMod or Picatinny, by version
- Price tier
- Budget
The KAG is a short, forward-swept grip designed as a hand index rather than a handle. It takes up far less handguard than a full angled grip.
Trade-off. Too small to hold like a traditional grip.
Vertical Grip Mod 3
Best for a compact grip used as a stop
- Type
- Short vertical foregrip
- Material
- Polymer
- Texture
- Ribbed
- Traction
- Medium
- Adds
- Short grip, slight forward cant
- Install
- M-LOK, KeyMod or Picatinny, by version
- Price tier
- Budget
BCM’s short vertical grip is angled slightly forward and sized to be held with part of the hand on the handguard. It is light and takes up little handguard.
Trade-off. Short for anyone who wants a full fist on the grip.
RVG and M-LOK MVG Vertical Grips
Best for a basic full-length vertical grip
- Type
- Vertical foregrip
- Material
- Reinforced polymer
- Texture
- Molded texture
- Traction
- Medium
- Adds
- Full-length grip
- Install
- Picatinny (RVG) or M-LOK (MVG)
- Price tier
- Budget
The RVG clamps to Picatinny rail and the MVG bolts to M-LOK. Both are one-piece polymer grips with Magpul’s molded texture and no moving parts.
Trade-off. No storage and no quick-detach mount.
Stubby Vertical Grip
Best for a short grip with a tool-free rail mount
- Type
- Short vertical foregrip
- Material
- Polymer
- Texture
- Ribbed
- Traction
- Medium
- Adds
- Short grip with storage
- Install
- Picatinny, with other mounts by version
- Price tier
- Mid-range
TangoDown’s stubby grip is a long-established duty option. The rail version slides on and locks with spring tabs, and the body has a capped storage compartment.
Trade-off. Bulkier than BCM’s short grip.
M-LOK Hand Stop Kit
Best for a minimal index point
- Type
- Handstop
- Material
- Reinforced polymer
- Texture
- Ribbed
- Traction
- Mild
- Adds
- Small stop plus panel covers
- Install
- M-LOK
- Price tier
- Budget
A small stop that bolts into an M-LOK slot, supplied with matching slot covers. It gives the hand a reference point and something to brace against a barricade without adding a handle.
Trade-off. M-LOK only, and little to hold if you prefer a real grip.
Strike Industries
LINK Curved ForeGrip
Best for one grip for mixed handguards
- Type
- Angled foregrip
- Material
- Polymer or aluminum, by version
- Texture
- Ribbed
- Traction
- Medium
- Adds
- Curved hook
- Install
- Fits both M-LOK and KeyMod
- Price tier
- Budget
The LINK mount is made to attach to either M-LOK or KeyMod without separate hardware kits. The curved grip can be mounted facing forward or back.
Trade-off. Shorter and slimmer than an AFG, so it supports less of the palm.
Questions people ask
Can I put a vertical foregrip on an AR pistol?
The ATF’s published position is that a vertical fore grip on a handgun creates an NFA-regulated “any other weapon”. Angled grips and handstops have been treated differently in ATF letters. Overall length changes the analysis, and state law may be stricter. Check before you buy.
Angled or vertical foregrip?
Angled grips suit a thumb-forward hold and keep the wrist straight. Vertical grips suit a fist hold and give more leverage for carrying and controlling a front-heavy rifle.
Does a foregrip need to be tight?
Yes. Follow the maker’s torque guidance for M-LOK hardware and re-check it after the first range session, because polymer and aluminum settle.