G10 grips
Fiberglass and epoxy pressed into a hard, stable laminate. It takes the sharpest textures of any grip material.
What it is
G10 is made from layers of woven fiberglass cloth soaked in epoxy resin and cured under heat and pressure. The result is a dense, rigid sheet that is then machined into grip panels and knife scales.
How it behaves
G10 does not absorb water, oil or solvent, and it does not swell or shrink with humidity. It machines cleanly, so makers can cut crisp checkering, grooves and dimples that stay sharp for years. When sheets are built from layers of different colors, machining exposes the layers as contour lines.
It feels hard and cool in the hand and does nothing to cushion recoil.
G10 or Micarta
| G10 | Micarta | |
|---|---|---|
| Reinforcement | Fiberglass cloth | Linen, canvas or paper |
| Resin | Epoxy | Phenolic |
| Feel | Hard, crisp, cool | Slightly warmer and softer |
| Wet grip | Depends on the machined texture | Unpolished surfaces grip well when damp |
| Aging | Looks the same for years | Darkens and develops a patina |
| Texture detail | Very sharp | Softer edges |
Where you find it
1911 grips from VZ, LOK and Wilson Combat, panels for the Beretta 92 and CZ 75, and revolver grips.
Questions people ask
Is G10 better than wood?
It is tougher and immune to oil and moisture, and it can be far more aggressive. Wood is warmer and traditional. See wood.
Does G10 wear out?
Very slowly. Sharp textures can abrade clothing and skin long before the grip itself wears.