Stippling explained, and when grip tape is the better call
Stippling is a permanent texture burned into a polymer frame. Here is what it does well, what it costs you and what to try first.
What stippling is
Stippling uses a heated tip, usually a modified soldering iron or wood burner, to press hundreds of small divots into the surface of a polymer frame. The displaced plastic forms a raised rim around each divot, and those rims are what your hand feels. Different tips make different patterns, from fine “sandpaper” dots to large round dimples.
Some shops use a laser instead. Laser stippling removes a controlled amount of material in a programmed pattern, which gives a very even result.
What it does well
A stippled frame has texture everywhere the work was done, including places a wrap cannot reach, such as the undercut behind the trigger guard and index points on the frame above it. It adds no thickness, never peels and has no edges to lift.
What it costs
- It is permanent. There is no undoing a texture you find too sharp, short of sanding it down.
- Warranty and resale. Manufacturers can decline warranty work on frames that have been modified, and many buyers pay less for a stippled pistol.
- Quality varies. A careless job can thin the frame or look rough. Professional work costs far more than a wrap.
- It commits you to one texture. A wrap lets you move from rubber to grit and back.
Stippling, wrap or sleeve
| Stippling | Adhesive wrap | Slip-on sleeve | |
|---|---|---|---|
| Reversible | No | Yes | Yes |
| Adds thickness | None | About half a millimeter | A few millimeters |
| Choice of texture | Fixed once done | Rubber, mid or grit | Mostly soft rubber |
| Typical cost | Highest when done professionally | Lowest | Low |
| Lifespan | Life of the frame | Replace every year or two | Several years |
| Affects warranty | It can | No | No |
Try this first
Fit an adhesive wrap in the texture you think you want and carry it for a month. If you still wish for texture in places the wrap does not cover, or you are tired of replacing wraps, stippling by a reputable shop is a reasonable next step. If the wrap solved the problem, you have saved the frame.
Questions people ask
Does stippling void a Glock warranty?
Glock and other makers can refuse warranty service on frames altered by anyone else. Ask the manufacturer before modifying a pistol that is still under warranty.
Can I stipple a frame myself?
People do, and practice on spare magazine base plates or Magpul parts first. A mistake on the frame cannot be undone, which is why many owners pay a professional.