Best mountain bike grips
Diameter and compound decide comfort. Lock-on clamps decide whether the grip ever twists.
Mountain bike grips take hits that road tape never sees, and they are the main thing damping trail chatter before it reaches your hands. Nearly all modern grips are lock-on designs: a rubber sleeve molded over a plastic core with an aluminum collar that clamps to the bar.
All of these fit standard 22.2 mm flat and riser bars.
Quick picks
| Pick | Grip | Why |
|---|---|---|
| Top pick | ODI Elite Pro Lock-On | Shaped padding where the palm needs it, single clamp. |
| Thick and cushioned | Oury V2 Lock-On | Deep, soft blocks for big hands and rough trails. |
| Lightest and softest | ESI Grips Chunky | Silicone foam with no clamp at all. |
| Slim | DMR Deathgrip | Thin option with a mix of patterns. |
How to choose
Diameter
Roughly 30 mm suits most hands. Thinner grips, around 29 mm, give more bar feel and suit small hands. Thicker grips, 32 mm and up, add cushion and reduce how tightly you must close your fingers. Too thick for your hand causes forearm pump.
Single or double clamp
A single inboard clamp leaves the outer end soft, which is more comfortable under the edge of the palm. Double clamps are the most secure and put hard collars at both ends.
Compound
Softer rubber grips better and damps more, and it wears faster. Many grips are sold in more than one compound.
Flange
A flange is a lip at the inner end. Some riders use it as a thumb reference. Others find it crowds the shifter and brake clamp.
The grips
Elite Pro Lock-On
Best for trail and enduro riding
- Type
- Lock-on grip
- Material
- Rubber over a plastic core
- Texture
- Lugged
- Traction
- Medium
- Adds
- Medium diameter, offset padding
- Install
- One clamp bolt per side
- Price tier
- Mid-range
ODI invented the lock-on grip. The Elite Pro has a single inboard clamp, extra thickness on the top where the palm sits, and a half-waffle pattern underneath for the fingers.
Trade-off. The shaped profile has a correct orientation, so set it carefully.
Rogue Lock-On
Best for large hands and gloveless riding
- Type
- Lock-on grip
- Material
- Rubber over a plastic core
- Texture
- Waffle
- Traction
- Medium
- Adds
- Large diameter
- Install
- One or two clamps, by version
- Price tier
- Mid-range
A thick grip with big, soft, raised pads. One of the most cushioned lock-ons.
Trade-off. Bulky for small or medium hands.
GA2
Best for a soft, simple all-mountain grip
- Type
- Lock-on grip
- Material
- Rubber over a plastic core
- Texture
- Ribbed
- Traction
- Medium
- Adds
- Medium diameter, GA2 Fat is thicker
- Install
- One clamp bolt per side
- Price tier
- Mid-range
A round grip with a single clamp, a soft compound and zones of different texture. The GA2 Fat adds diameter for more damping.
Trade-off. Soft rubber wears under heavy use.
Chunky
Best for cross-country riders and sore hands
- Type
- Push-on silicone grip
- Material
- Silicone foam
- Texture
- Smooth
- Traction
- Medium
- Adds
- 32 mm, other thicknesses available
- Install
- Slide on with alcohol, no clamp
- Price tier
- Budget
A plain tube of silicone foam with no core and no clamps. It is very light, damps vibration well and stays grippy in the wet. ESI makes thinner and thicker versions.
Trade-off. Tears if the bike is dropped on its end, and can rotate if water gets underneath.
DMR
Deathgrip
Best for choosing your own thickness and flange
- Type
- Lock-on grip
- Material
- Rubber over a plastic core
- Texture
- Knurled
- Traction
- Medium
- Adds
- Thin or thick, with or without flange
- Install
- One clamp bolt per side
- Price tier
- Mid-range
A signature grip combining a waffle section under the fingers, knurling on top and ribs at the thumb. It is sold in two thicknesses, with or without a flange, and in several compounds.
Trade-off. Several versions to sort through when ordering.
PNW Components
Loam Grip
Best for a tacky grip with a tapered core
- Type
- Lock-on grip
- Material
- Rubber over a plastic core
- Texture
- Ribbed
- Traction
- Medium
- Adds
- Medium diameter
- Install
- One clamp bolt per side
- Price tier
- Mid-range
A single-clamp grip with a tacky compound and a core that thins toward the outer end for more cushion there.
Trade-off. One diameter in the standard version.
Oury
V2 Lock-On
Best for maximum cushioning
- Type
- Lock-on grip
- Material
- Rubber over a plastic core
- Texture
- Waffle
- Traction
- Medium
- Adds
- Large diameter, deep blocks
- Install
- One clamp bolt per side
- Price tier
- Mid-range
Oury’s square-block pattern dates back decades and remains one of the softest, deepest grips available. The V2 is the lock-on version.
Trade-off. The blocks squirm slightly under hard cornering loads.
Questions people ask
Are mountain bike grips universal?
Nearly. Flat and riser bars are 22.2 mm at the grip area. Check length if you use grip shifters, which need shorter grips.
Why do my hands go numb on the bike?
Pressure on the ulnar nerve at the outer palm is the usual cause. A wider or winged grip, or a different bar sweep, spreads that pressure. See ergonomic grips.
How do I get old grips off?
Loosen the clamp bolts on lock-ons. For push-on grips, slide a thin screwdriver under the edge and squirt in rubbing alcohol, or use compressed air.